Safety is Our Business. Call 0333 577 5699 or email us

Basket Empty (0) Total: £0.00

S2 FFP3/N99 filters

£13.00 incl. VAT

To make sure you’re protected, you should always use your mask with a filter, and dispose of the filter after use.

The filters are currently being tested by SGS labs to confirm filtration of 99.9% of particles larger than 6 nanometers.

Covid-19 is approximately 6 nanometer, therefore our filters keep you protected.

Facemasks with filters larger than 6 nanometers, are useless in the fight against Covid-19.

Our filters have been designed to the same standards as FFP3/N99 Filters. This means we filter out all particles that are 6nm and larger. MoD’s filters pass the following test standards, with specific results listed below:
  • YY/T 0969-2013: BFE 99.7% filter efficiency
  • GB/T 32610-2016: PFE 98.6% filter efficiency for 1 layer (we are using 3 electrostatic layers)
  • GB2626: >99.97% at 0.3 microns
  • Activated Carbon 2.5pm filter

Disclaimer

These masks are not sold as medical devices and are not a replacement for surgical or procedural masks. Though, the breathable face shield is made with medical-grade, FDA and LFGB approved silicone. Fitted with a filter, your mask will help fight the spread of COVID-19. MoD’s S2 mask is designed in Amsterdam, over 10,000 customers globally are now using the S2 to protect themselves and their loved ones. This is a general-purpose filter and provides general-purpose protection. MoD is not a medical device manufacturer. This product is not intended to diagnose, treat, cure any disease. MoD’s filters pass the following test standards, with specific results listed below:
  • YY/T 0969-2013: BFE 99.7% filter efficiency
  • GB/T 32610-2016: PFE 98.6% filter efficiency for 1 layer (we are using 3 electrostatic layers)
  • GB2626: >99.97% at 0.3 microns
  • Activated Carbon 2.5pm filter
[/cs_content]
Top